Heat-Sealing Machine HSG-CC

You are here:

Home
Products
Heat-Sealing Machine HSG-CC

… is designed for testing the heat sealability of films. The pair of sealing jaws is easy to change and the temperature can be individually set.

How it works

The HSG-CC is designed for testing the heat sealability of varnished or coated films. The HSG-CC has a removable pair of sealing jaws which temperature may be individually set between ambient temperature and 300 °C. In addition, you may control the dwell time and the sealing force. The actual and set temperatures as well as the dwell time and sealing force are shown in the display. If your lab is not equipped with a compressed-air supply, use our special HSG-CC Compressor Version. You may wish to obtain our special software to evaluate the results for documentation purposes. For sealing jaws with a smooth surface the sealing pressure will be automatically calculated and displayed from the set sealing force. Test the seam strength of the sealed samples with our Universal Tensile Tester VNG-E. An optional Hot Tack Device can be obtained as an accessory. Also, an optional load cell enables you to adjust the force display any time. You may adjust the Temperature, Force and Time parameters with our newly developed HSG-P testing device.

Standing device

The standing device has an integrated compressor and doesn’t need external compressed air.

Technical Details

Test method	Simulation of a head sealing equipment to determine the best sealing parameters
Compressed-air supply	Table device: 6 bar to max. 10 bar \| Standing device: N/A
Seal jaws	150 mm x 10 mm smooth(standard). Other specifications upon request Seal temperature
Sealing temperature	Ambient temperature up to 300 °C (can be controlled separately for upper and lower sealing jaw)
Tolerance	1.5 °C + 1.0 %
Sealing force	40 N up to 1000 N for the entire sealing area
Tolerance	10 N + 0.5 %
Dwell time	0.1 – 300.0 s
Tolerance	0.1 s
PC interface	serial standard interface RS232, 9.600 Baud
Interface for force adjustment	Internal protocol
Dimensions	Table device: 65 x 35 x 44 cm \| Standing device: 68 x 48 x 125 cm
Weight	Table device: 24 kg \| Standing device: 76 kg
Storage temperature	0 °C – 50 °C
Working temperature	15 °C – 35 °C
Relative humidity	max. 80 %, non-condensing
Electrical connection	230 V / 50 – 60Hz, Table device: max. 500 W \| Standing device: 900 W
Standard	Following ASTM F 2029 – 16

Standard sealing jaws

For the HSG series we offer the following standard sealing jaws. Other types are available upon requiest. Within the range of 150 mm x 20 mm all surface types are available.